poslat odkaz na aplikaci

Nepal Solar Calculator


4.0 ( 320 ratings )
Nástroje
Vývojář: AEPC
Zdarma

A Solar PV system consists of four major components - Solar PV Module, Charge Controller, Battery, and an Inverter. The Solar PV Module generates electricity from sunlight; this electricity is used to charge a battery through the charge controller. Electricity stored in the battery is in the form of Direct Current (DC) and needs to be converted into Alternating Current (AC) using the inverter to power regular household appliances such as light bulbs, Televisions, Computers etc. Appliances that run on DC can be directly connected to the battery without the need for an inverter.


The Following information is important for a Solar PV System
1. Maintenance of PV Module: dust, dirt, bird droppings should be cleaned regularly from the panel surface. It is advisable to clean the panels at least once a month and twice a month for dusty areas.

2. Maintenance of Battery: It is advisable to do the regular visual inspection for electrolyte leakage, cracks in batteries, corrosion at battery terminals etc. The corrosion at battery terminal is seen a white coating around it. The liquid level should not be more than 0.5 inches lower than the top of the battery.

3. Tilt Angle: Due to the geographic location of Nepal, it is required to tilt the solar panels 30 (degree) from the horizontal surface to get maximum performance

For more information, it is requested to contact:
Alternative Energy Promotion Center (AEPC)
Khumaltar Heights, Lalitpur, Nepal
[email protected]; www.aepc.gov.np
Tell: +9771-5539390/391